6061 Aluminum vs. Zirconia
6061 aluminum and zirconia belong to fundamentally different material chemistries. 6061 aluminum is a metal, while zirconia is a ceramic material. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 14 material properties with values for both materials. Properties with values for just one material (25, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 6061 aluminum and the bottom bar is zirconia.
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 69 | |
| 190 to 200 |
| Poisson's Ratio | 0.33 | |
| 0.25 to 0.29 |
| Tensile Strength: Ultimate (UTS), MPa | 130 to 410 | |
| 410 to 450 |
Thermal Properties
| Maximum Temperature: Mechanical, °C | 170 | |
| 500 to 1330 |
| Specific Heat Capacity, J/kg-K | 900 | |
| 400 to 510 |
| Thermal Conductivity, W/m-K | 170 | |
| 2.2 to 4.3 |
| Thermal Expansion, µm/m-K | 24 | |
| 8.8 to 9.5 |
Otherwise Unclassified Properties
| Density, g/cm3 | 2.7 | |
| 5.7 to 6.0 |
Common Calculations
| Stiffness to Weight: Axial, points | 14 | |
| 19 |
| Stiffness to Weight: Bending, points | 50 | |
| 33 to 34 |
| Strength to Weight: Axial, points | 13 to 42 | |
| 19 to 22 |
| Strength to Weight: Bending, points | 21 to 45 | |
| 21 to 23 |
| Thermal Diffusivity, mm2/s | 68 | |
| 0.73 to 1.8 |
| Thermal Shock Resistance, points | 5.7 to 18 | |
| 15 to 19 |