7075 Aluminum vs. PFA
7075 aluminum and PFA belong to fundamentally different material chemistries. 7075 aluminum is a metal, while PFA is a polymeric material. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 11 material properties with values for both materials. Properties with values for just one material (30, in this case) are not shown.
For each property being compared, the top bar is 7075 aluminum and the bottom bar is PFA.
Metric UnitsUS Customary Units
Mechanical Properties
Elongation at Break, % | 1.8 to 12 | |
300 |
Tensile Strength: Ultimate (UTS), MPa | 240 to 590 | |
30 |
Thermal Properties
Maximum Temperature: Mechanical, °C | 200 | |
260 |
Melting Onset (Solidus), °C | 480 | |
300 |
Specific Heat Capacity, J/kg-K | 870 | |
1000 |
Thermal Conductivity, W/m-K | 130 | |
0.25 |
Thermal Expansion, µm/m-K | 23 | |
120 |
Otherwise Unclassified Properties
Density, g/cm3 | 3.0 | |
2.2 |
Common Calculations
Strength to Weight: Axial, points | 22 to 54 | |
3.9 |
Strength to Weight: Bending, points | 28 to 52 | |
10 |
Thermal Diffusivity, mm2/s | 50 | |
0.12 |