AZ63A Magnesium vs. Ductile Cast Iron
AZ63A magnesium belongs to the magnesium alloys classification, while ductile cast iron belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is AZ63A magnesium and the bottom bar is ductile cast iron.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 46 | |
| 170 to 180 |
| Elongation at Break, % | 2.2 to 8.0 | |
| 2.1 to 20 |
| Poisson's Ratio | 0.29 | |
| 0.28 to 0.31 |
| Shear Modulus, GPa | 18 | |
| 64 to 70 |
| Shear Strength, MPa | 110 to 160 | |
| 420 to 800 |
| Tensile Strength: Ultimate (UTS), MPa | 190 to 270 | |
| 460 to 920 |
| Tensile Strength: Yield (Proof), MPa | 81 to 120 | |
| 310 to 670 |
Thermal Properties
| Latent Heat of Fusion, J/g | 350 | |
| 270 |
| Maximum Temperature: Mechanical, °C | 120 | |
| 290 |
| Melting Completion (Liquidus), °C | 610 | |
| 1160 |
| Melting Onset (Solidus), °C | 450 | |
| 1120 |
| Specific Heat Capacity, J/kg-K | 980 | |
| 490 |
| Thermal Conductivity, W/m-K | 52 to 65 | |
| 31 to 36 |
| Thermal Expansion, µm/m-K | 26 | |
| 11 |
Electrical Properties
| Electrical Conductivity: Equal Volume, % IACS | 12 to 15 | |
| 7.4 |
| Electrical Conductivity: Equal Weight (Specific), % IACS | 59 to 74 | |
| 8.8 to 9.4 |
Otherwise Unclassified Properties
| Base Metal Price, % relative | 12 | |
| 1.9 |
| Density, g/cm3 | 1.8 | |
| 7.1 to 7.5 |
| Embodied Carbon, kg CO2/kg material | 22 | |
| 1.5 |
| Embodied Energy, MJ/kg | 150 | |
| 21 |
| Embodied Water, L/kg | 970 | |
| 43 |
Common Calculations
| Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 3.7 to 16 | |
| 17 to 80 |
| Resilience: Unit (Modulus of Resilience), kJ/m3 | 71 to 160 | |
| 280 to 1330 |
| Stiffness to Weight: Axial, points | 14 | |
| 12 to 14 |
| Stiffness to Weight: Bending, points | 66 | |
| 24 to 26 |
| Strength to Weight: Axial, points | 29 to 41 | |
| 17 to 35 |
| Strength to Weight: Bending, points | 40 to 51 | |
| 18 to 29 |
| Thermal Diffusivity, mm2/s | 29 to 37 | |
| 8.9 to 10 |
| Thermal Shock Resistance, points | 11 to 16 | |
| 17 to 35 |
Alloy Composition
Deprecated: Automatic conversion of false to array is deprecated in /home/public/compare.php on line 452
| Aluminum (Al), % | 5.3 to 6.7 | |
| 0 |
| Carbon (C), % | 0 | |
| 3.0 to 3.5 |
| Copper (Cu), % | 0 to 0.25 | |
| 0 |
| Iron (Fe), % | 0 | |
| 93.7 to 95.5 |
| Magnesium (Mg), % | 88.6 to 92.1 | |
| 0 |
| Manganese (Mn), % | 0.15 to 0.35 | |
| 0 |
| Nickel (Ni), % | 0 to 0.010 | |
| 0 |
| Phosphorus (P), % | 0 | |
| 0 to 0.080 |
| Silicon (Si), % | 0 to 0.3 | |
| 1.5 to 2.8 |
| Zinc (Zn), % | 2.5 to 3.5 | |
| 0 |
| Residuals, % | 0 to 0.3 | |
| 0 |