MakeItFrom.com
Menu (ESC)

Alumina vs. Commercially Pure Palladium

Alumina and commercially pure palladium belong to fundamentally different material chemistries. Alumina is a ceramic material, while commercially pure palladium is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 13 material properties with values for both materials. Properties with values for just one material (20, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is alumina and the bottom bar is commercially pure palladium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 220 to 370
120
Knoop Hardness 960 to 1660
68 to 130
Poisson's Ratio 0.22 to 0.24
0.39
Tensile Strength: Ultimate (UTS), MPa 210 to 290
200 to 380

Thermal Properties

Melting Onset (Solidus), °C 2040
1550
Specific Heat Capacity, J/kg-K 870 to 940
240
Thermal Expansion, µm/m-K 6.7 to 8.2
12

Otherwise Unclassified Properties

Density, g/cm3 3.4 to 4.1
12

Common Calculations

Stiffness to Weight: Axial, points 35 to 53
5.6
Stiffness to Weight: Bending, points 57 to 62
14
Strength to Weight: Axial, points 14 to 23
4.5 to 8.8
Strength to Weight: Bending, points 19 to 28
6.2 to 9.7
Thermal Shock Resistance, points 4.9 to 14
9.8 to 19