MakeItFrom.com
Menu (ESC)

Alumina vs. SAE-AISI H43 Steel

Alumina and SAE-AISI H43 steel belong to fundamentally different material chemistries. Alumina is a ceramic material, while SAE-AISI H43 steel is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 14 material properties with values for both materials. Properties with values for just one material (20, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is alumina and the bottom bar is SAE-AISI H43 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 220 to 370
200
Poisson's Ratio 0.22 to 0.24
0.29
Tensile Strength: Ultimate (UTS), MPa 210 to 290
710 to 2140

Thermal Properties

Melting Onset (Solidus), °C 2040
1480
Specific Heat Capacity, J/kg-K 870 to 940
460
Thermal Conductivity, W/m-K 14 to 30
30
Thermal Expansion, µm/m-K 6.7 to 8.2
12

Otherwise Unclassified Properties

Density, g/cm3 3.4 to 4.1
7.9

Common Calculations

Stiffness to Weight: Axial, points 35 to 53
14
Stiffness to Weight: Bending, points 57 to 62
24
Strength to Weight: Axial, points 14 to 23
25 to 75
Strength to Weight: Bending, points 19 to 28
22 to 46
Thermal Diffusivity, mm2/s 3.7 to 10
8.3
Thermal Shock Resistance, points 4.9 to 14
21 to 62