MakeItFrom.com
Menu (ESC)

Carbon-carbon vs. Grade 3 Babbitt Metal

Carbon-carbon and grade 3 Babbitt Metal belong to fundamentally different material chemistries. Carbon-carbon is a ceramic material, while grade 3 Babbitt Metal is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 9 material properties with values for both materials. Properties with values for just one material (21, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is carbon-carbon and the bottom bar is grade 3 Babbitt Metal.

Metric UnitsUS Customary Units

Material Properties

Compressive (Crushing) Strength, MPa 240
120
Density, g/cm3 1.7
7.4
Elastic (Young's, Tensile) Modulus, GPa 95
56
Poisson's Ratio 0.32
0.35
Shear Modulus, GPa 36
21
Specific Heat Capacity, J/kg-K 760
230
Stiffness to Weight: Axial, points 31
4.2
Stiffness to Weight: Bending, points 89
17
Thermal Expansion, µm/m-K 4.0
21