MakeItFrom.com
Menu (ESC)

Monel 400 vs. PTT

Monel 400 and PTT belong to fundamentally different material chemistries. Monel 400 is a metal, while PTT is a polymeric material. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 9 material properties with values for both materials. Properties with values for just one material (25, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is Monel 400 and the bottom bar is PTT.

Metric UnitsUS Customary Units

Material Properties

Density, g/cm3 8.9
1.3
Elastic (Young's, Tensile) Modulus, GPa 160
2.5
Elongation at Break, % 20 to 40
60
Melting Onset (Solidus), °C 1300
230
Stiffness to Weight: Axial, points 10
1.0
Stiffness to Weight: Bending, points 21
34
Strength to Weight: Axial, points 17 to 25
13
Strength to Weight: Bending, points 17 to 21
26
Tensile Strength: Ultimate (UTS), MPa 540 to 780
60