MakeItFrom.com
Menu (ESC)

Monel 400 vs. UP

Monel 400 and UP belong to fundamentally different material chemistries. Monel 400 is a metal, while UP is a polymeric material. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 13 material properties with values for both materials. Properties with values for just one material (22, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is Monel 400 and the bottom bar is UP.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 160
17
Elongation at Break, % 20 to 40
1.0
Tensile Strength: Ultimate (UTS), MPa 540 to 780
30

Thermal Properties

Specific Heat Capacity, J/kg-K 430
1200
Thermal Conductivity, W/m-K 23
0.7
Thermal Expansion, µm/m-K 14
3.0

Otherwise Unclassified Properties

Density, g/cm3 8.9
2.0

Common Calculations

Stiffness to Weight: Axial, points 10
4.7
Stiffness to Weight: Bending, points 21
43
Strength to Weight: Axial, points 17 to 25
4.2
Strength to Weight: Bending, points 17 to 21
11
Thermal Diffusivity, mm2/s 6.1
0.29
Thermal Shock Resistance, points 17 to 25
42