MakeItFrom.com
Menu (ESC)

PVC-P vs. CC334G Bronze

PVC-P and CC334G bronze belong to fundamentally different material chemistries. PVC-P is a polymeric material, while CC334G bronze is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 16 material properties with values for both materials. Properties with values for just one material (24, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PVC-P and the bottom bar is CC334G bronze.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 1.4
120
Elongation at Break, % 180
5.6
Poisson's Ratio 0.39
0.33
Tensile Strength: Ultimate (UTS), MPa 16
810

Thermal Properties

Maximum Temperature: Mechanical, °C 75
240
Melting Onset (Solidus), °C 190
1020
Specific Heat Capacity, J/kg-K 1400
450
Thermal Conductivity, W/m-K 0.17
41
Thermal Expansion, µm/m-K 160
18

Otherwise Unclassified Properties

Density, g/cm3 1.4
8.2

Common Calculations

Stiffness to Weight: Axial, points 0.57
8.1
Stiffness to Weight: Bending, points 28
20
Strength to Weight: Axial, points 3.2
28
Strength to Weight: Bending, points 10
24
Thermal Diffusivity, mm2/s 0.090
11
Thermal Shock Resistance, points 4.9
28