MakeItFrom.com
Menu (ESC)

PVC-P vs. CC763S Brass

PVC-P and CC763S brass belong to fundamentally different material chemistries. PVC-P is a polymeric material, while CC763S brass is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 14 material properties with values for both materials. Properties with values for just one material (26, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PVC-P and the bottom bar is CC763S brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 1.4
110
Elongation at Break, % 180
7.3
Poisson's Ratio 0.39
0.31
Tensile Strength: Ultimate (UTS), MPa 16
490

Thermal Properties

Maximum Temperature: Mechanical, °C 75
140
Melting Onset (Solidus), °C 190
830
Specific Heat Capacity, J/kg-K 1400
400
Thermal Expansion, µm/m-K 160
20

Otherwise Unclassified Properties

Density, g/cm3 1.4
8.0

Common Calculations

Stiffness to Weight: Axial, points 0.57
7.5
Stiffness to Weight: Bending, points 28
20
Strength to Weight: Axial, points 3.2
17
Strength to Weight: Bending, points 10
17
Thermal Shock Resistance, points 4.9
16