MakeItFrom.com
Menu (ESC)

PVC-P vs. Lead-alkali-silica Glass

PVC-P and lead-alkali-silica glass belong to fundamentally different material chemistries. PVC-P is a polymeric material, while lead-alkali-silica glass is ceramic. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 9 material properties with values for both materials. Properties with values for just one material (20, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PVC-P and the bottom bar is lead-alkali-silica glass.

Metric UnitsUS Customary Units

Material Properties

Density, g/cm3 1.4
3.1
Dielectric Constant (Relative Permittivity) At 1 Hz 5.8
7.0
Elastic (Young's, Tensile) Modulus, GPa 1.4
67
Electrical Dissipation At 1 Hz 0.12
0.0024
Electrical Resistivity Order of Magnitude, 10x Ω-m 11
12
Glass Transition Temperature, °C 75
450
Stiffness to Weight: Axial, points 0.57
12
Stiffness to Weight: Bending, points 28
43
Thermal Expansion, µm/m-K 160
9.0