MakeItFrom.com
Menu (ESC)

PVC-P vs. N06975 Nickel

PVC-P and N06975 nickel belong to fundamentally different material chemistries. PVC-P is a polymeric material, while N06975 nickel is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 14 material properties with values for both materials. Properties with values for just one material (25, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PVC-P and the bottom bar is N06975 nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 1.4
200
Elongation at Break, % 180
45
Poisson's Ratio 0.39
0.28
Tensile Strength: Ultimate (UTS), MPa 16
660

Thermal Properties

Maximum Temperature: Mechanical, °C 75
1000
Melting Onset (Solidus), °C 190
1380
Specific Heat Capacity, J/kg-K 1400
460
Thermal Expansion, µm/m-K 160
13

Otherwise Unclassified Properties

Density, g/cm3 1.4
8.3

Common Calculations

Stiffness to Weight: Axial, points 0.57
14
Stiffness to Weight: Bending, points 28
24
Strength to Weight: Axial, points 3.2
22
Strength to Weight: Bending, points 10
20
Thermal Shock Resistance, points 4.9
18