MakeItFrom.com
Menu (ESC)

PVC-P vs. N07716 Nickel

PVC-P and N07716 nickel belong to fundamentally different material chemistries. PVC-P is a polymeric material, while N07716 nickel is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 16 material properties with values for both materials. Properties with values for just one material (26, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PVC-P and the bottom bar is N07716 nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 1.4
200
Elongation at Break, % 180
34
Poisson's Ratio 0.39
0.29
Tensile Strength: Ultimate (UTS), MPa 16
860

Thermal Properties

Maximum Temperature: Mechanical, °C 75
980
Melting Onset (Solidus), °C 190
1430
Specific Heat Capacity, J/kg-K 1400
440
Thermal Conductivity, W/m-K 0.17
11
Thermal Expansion, µm/m-K 160
13

Otherwise Unclassified Properties

Density, g/cm3 1.4
8.5

Common Calculations

Stiffness to Weight: Axial, points 0.57
13
Stiffness to Weight: Bending, points 28
23
Strength to Weight: Axial, points 3.2
28
Strength to Weight: Bending, points 10
24
Thermal Diffusivity, mm2/s 0.090
2.8
Thermal Shock Resistance, points 4.9
24