MakeItFrom.com
Menu (ESC)

PVC-P vs. N10624 Nickel

PVC-P and N10624 nickel belong to fundamentally different material chemistries. PVC-P is a polymeric material, while N10624 nickel is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 14 material properties with values for both materials. Properties with values for just one material (26, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PVC-P and the bottom bar is N10624 nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 1.4
220
Elongation at Break, % 180
45
Poisson's Ratio 0.39
0.3
Tensile Strength: Ultimate (UTS), MPa 16
810

Thermal Properties

Maximum Temperature: Mechanical, °C 75
930
Melting Onset (Solidus), °C 190
1520
Specific Heat Capacity, J/kg-K 1400
410
Thermal Expansion, µm/m-K 160
11

Otherwise Unclassified Properties

Density, g/cm3 1.4
9.0

Common Calculations

Stiffness to Weight: Axial, points 0.57
13
Stiffness to Weight: Bending, points 28
22
Strength to Weight: Axial, points 3.2
25
Strength to Weight: Bending, points 10
22
Thermal Shock Resistance, points 4.9
24