PA 6 vs. DAP
PA 6 belongs to the thermoplastics classification, while DAP belongs to the thermoset plastics. There are 6 material properties with values for both materials. Properties with values for just one material (21, in this case) are not shown.
For each property being compared, the top bar is PA 6 and the bottom bar is DAP.
Metric UnitsUS Customary Units
Material Properties
| Dielectric Strength (Breakdown Potential), kV/mm | 10 to 30 | |
| 40 |
| Elastic (Young's, Tensile) Modulus, GPa | 1.1 to 16 | |
| 13 |
| Elongation at Break, % | 2.5 to 67 | |
| 31 |
| Flexural Strength, MPa | 40 to 230 | |
| 62 |
| Glass Transition Temperature, °C | 40 | |
| 150 |
| Tensile Strength: Ultimate (UTS), MPa | 35 to 210 | |
| 28 |