PCL vs. Silicone Plastic
PCL belongs to the thermoplastics classification, while silicone plastic belongs to the thermoset plastics. There are 9 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.
For each property being compared, the top bar is PCL and the bottom bar is silicone plastic.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.1 | |
| 1.9 |
| Elastic (Young's, Tensile) Modulus, GPa | 1.2 | |
| 9.0 |
| Glass Transition Temperature, °C | -60 | |
| 200 |
| Maximum Temperature: Decomposition, °C | 200 | |
| 480 |
| Stiffness to Weight: Axial, points | 0.61 | |
| 2.6 |
| Stiffness to Weight: Bending, points | 32 | |
| 36 |
| Strength to Weight: Axial, points | 2.5 | |
| 5.5 |
| Strength to Weight: Bending, points | 9.4 | |
| 13 |
| Tensile Strength: Ultimate (UTS), MPa | 10 | |
| 38 |