MakeItFrom.com
Menu (ESC)

PEEK vs. Silica Aerogel

PEEK and silica aerogel belong to fundamentally different material chemistries. PEEK is a polymeric material, while silica aerogel is ceramic. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 10 material properties with values for both materials. Properties with values for just one material (21, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PEEK and the bottom bar is silica aerogel.

Metric UnitsUS Customary Units

Material Properties

Density, g/cm3 1.3 to 1.5
0.1
Elastic (Young's, Tensile) Modulus, GPa 4.0 to 24
0.0050
Stiffness to Weight: Axial, points 1.5 to 10
0.028
Stiffness to Weight: Bending, points 36 to 73
57
Strength to Weight: Axial, points 20 to 41
0.044
Strength to Weight: Bending, points 36 to 55
1.4
Tensile Strength: Ultimate (UTS), MPa 97 to 200
0.016
Thermal Conductivity, W/m-K 0.25 to 0.93
0.016
Thermal Expansion, µm/m-K 15 to 52
2.0
Thermal Shock Resistance, points 34 to 57
110