MakeItFrom.com
Menu (ESC)

PEEK vs. C91300 Bell Metal

PEEK and C91300 bell metal belong to fundamentally different material chemistries. PEEK is a polymeric material, while C91300 bell metal is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 14 material properties with values for both materials. Properties with values for just one material (28, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PEEK and the bottom bar is C91300 bell metal.

Metric UnitsUS Customary Units

Mechanical Properties

Compressive (Crushing) Strength, MPa 120 to 300
190
Elastic (Young's, Tensile) Modulus, GPa 4.0 to 24
100
Elongation at Break, % 1.6 to 43
0.5
Tensile Strength: Ultimate (UTS), MPa 97 to 200
240

Thermal Properties

Maximum Temperature: Mechanical, °C 330
150
Melting Onset (Solidus), °C 340
820
Specific Heat Capacity, J/kg-K 1390 to 1700
360
Thermal Expansion, µm/m-K 15 to 52
18

Otherwise Unclassified Properties

Density, g/cm3 1.3 to 1.5
8.6

Common Calculations

Stiffness to Weight: Axial, points 1.5 to 10
6.6
Stiffness to Weight: Bending, points 36 to 73
18
Strength to Weight: Axial, points 20 to 41
7.8
Strength to Weight: Bending, points 36 to 55
10
Thermal Shock Resistance, points 34 to 57
9.3