MakeItFrom.com
Menu (ESC)

PEEK vs. C99600 Bronze

PEEK and C99600 bronze belong to fundamentally different material chemistries. PEEK is a polymeric material, while C99600 bronze is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 13 material properties with values for both materials. Properties with values for just one material (27, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PEEK and the bottom bar is C99600 bronze.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 4.0 to 24
150
Elongation at Break, % 1.6 to 43
27 to 34
Tensile Strength: Ultimate (UTS), MPa 97 to 200
560

Thermal Properties

Maximum Temperature: Mechanical, °C 330
200
Melting Onset (Solidus), °C 340
1050
Specific Heat Capacity, J/kg-K 1390 to 1700
440
Thermal Expansion, µm/m-K 15 to 52
19

Otherwise Unclassified Properties

Density, g/cm3 1.3 to 1.5
8.1

Common Calculations

Stiffness to Weight: Axial, points 1.5 to 10
10
Stiffness to Weight: Bending, points 36 to 73
22
Strength to Weight: Axial, points 20 to 41
19
Strength to Weight: Bending, points 36 to 55
19
Thermal Shock Resistance, points 34 to 57
14