PES vs. ACI-ASTM CF10SMnN Steel

PES and ACI-ASTM CF10SMnN steel belong to fundamentally different material chemistries. PES is a polymeric material, while ACI-ASTM CF10SMnN steel is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 12 material properties with values for both materials. Properties with values for just one material (35, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is PES and the bottom bar is ACI-ASTM CF10SMnN steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa		2.6
Elastic (Young's, Tensile) Modulus, GPa		190

Elongation at Break, %		65
Elongation at Break, %		34

Tensile Strength: Ultimate (UTS), MPa		87
Tensile Strength: Ultimate (UTS), MPa		660

Thermal Properties

Maximum Temperature: Mechanical, °C		200
Maximum Temperature: Mechanical, °C		900

Specific Heat Capacity, J/kg-K		1100
Specific Heat Capacity, J/kg-K		500

Thermal Expansion, µm/m-K		53
Thermal Expansion, µm/m-K		16

Common Calculations

Stiffness to Weight: Axial, points		1.1
Stiffness to Weight: Axial, points		14

Stiffness to Weight: Bending, points		33
Stiffness to Weight: Bending, points		26

Strength to Weight: Axial, points		18
Strength to Weight: Axial, points		24

Strength to Weight: Bending, points		32
Strength to Weight: Bending, points		22

Thermal Shock Resistance, points		45
Thermal Shock Resistance, points		15

Density, g/cm³		1.4
Density, g/cm³		7.5

PES vs. ACI-ASTM CF10SMnN Steel

Mechanical Properties

Thermal Properties

Otherwise Unclassified Properties

Common Calculations

Find Materials

Table of Contents