PES vs. C95410 Bronze
PES and C95410 bronze belong to fundamentally different material chemistries. PES is a polymeric material, while C95410 bronze is a metal. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 14 material properties with values for both materials. Properties with values for just one material (32, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is PES and the bottom bar is C95410 bronze.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 2.6 | |
120 |
Elongation at Break, % | 65 | |
9.1 to 13 |
Tensile Strength: Ultimate (UTS), MPa | 87 | |
620 to 740 |
Thermal Properties
Maximum Temperature: Mechanical, °C | 200 | |
230 |
Specific Heat Capacity, J/kg-K | 1100 | |
440 |
Thermal Conductivity, W/m-K | 0.18 | |
59 |
Thermal Expansion, µm/m-K | 53 | |
18 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.4 | |
8.2 |
Common Calculations
Stiffness to Weight: Axial, points | 1.1 | |
7.8 |
Stiffness to Weight: Bending, points | 33 | |
20 |
Strength to Weight: Axial, points | 18 | |
21 to 25 |
Strength to Weight: Bending, points | 32 | |
20 to 22 |
Thermal Diffusivity, mm2/s | 0.12 | |
16 |
Thermal Shock Resistance, points | 45 | |
22 to 26 |