PET vs. LDPE
Both PET and LDPE are thermoplastics. There are 13 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is PET and the bottom bar is LDPE.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 3.5 to 11 | |
| 0.3 |
| Tensile Strength: Ultimate (UTS), MPa | 60 to 140 | |
| 7.0 |
Thermal Properties
| Glass Transition Temperature, °C | 70 | |
| -130 |
| Maximum Temperature: Autoignition, °C | 410 | |
| 380 |
| Maximum Temperature: Decomposition, °C | 390 | |
| 400 |
| Melting Onset (Solidus), °C | 260 | |
| 110 |
| Specific Heat Capacity, J/kg-K | 1000 to 1150 | |
| 2300 |
Electrical Properties
| Dielectric Constant (Relative Permittivity) At 1 Hz | 3.7 | |
| 2.3 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.4 to 1.6 | |
| 0.92 |
Common Calculations
| Stiffness to Weight: Axial, points | 1.2 to 4.4 | |
| 0.18 |
| Stiffness to Weight: Bending, points | 32 to 54 | |
| 24 |
| Strength to Weight: Axial, points | 12 to 27 | |
| 2.1 |
| Strength to Weight: Bending, points | 25 to 41 | |
| 8.8 |