PTT vs. Phenolic
PTT belongs to the thermoplastics classification, while phenolic belongs to the thermoset plastics. There are 8 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown.
For each property being compared, the top bar is PTT and the bottom bar is phenolic.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.3 | |
| 1.3 |
| Elastic (Young's, Tensile) Modulus, GPa | 2.5 | |
| 3.8 |
| Elongation at Break, % | 60 | |
| 2.0 |
| Stiffness to Weight: Axial, points | 1.0 | |
| 1.6 |
| Stiffness to Weight: Bending, points | 34 | |
| 40 |
| Strength to Weight: Axial, points | 13 | |
| 10 |
| Strength to Weight: Bending, points | 26 | |
| 23 |
| Tensile Strength: Ultimate (UTS), MPa | 60 | |
| 48 |