AU vs. PVC-P
AU belongs to the thermoset elastomers (rubber) classification, while PVC-P belongs to the thermoplastics. There are 8 material properties with values for both materials. Properties with values for just one material (19, in this case) are not shown.
For each property being compared, the top bar is AU and the bottom bar is PVC-P.
Metric UnitsUS Customary Units
Material Properties
| Elongation at Break, % | 580 | |
| 180 |
| Glass Transition Temperature, °C | -50 | |
| 75 |
| Maximum Temperature: Autoignition, °C | 360 | |
| 320 |
| Maximum Temperature: Decomposition, °C | 330 | |
| 250 |
| Maximum Temperature: Mechanical, °C | 90 | |
| 75 |
| Specific Heat Capacity, J/kg-K | 1760 | |
| 1400 |
| Tensile Strength: Ultimate (UTS), MPa | 39 | |
| 16 |
| Thermal Conductivity, W/m-K | 0.19 | |
| 0.17 |