MakeItFrom.com
Menu (ESC)

Soda-lime Glass vs. PP Copolymer

Soda-lime glass and PP copolymer belong to fundamentally different material chemistries. Soda-lime glass is a ceramic material, while PP copolymer is polymeric. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 9 material properties with values for both materials. Properties with values for just one material (19, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is soda-lime glass and the bottom bar is PP copolymer.

Metric UnitsUS Customary Units

Material Properties

Density, g/cm3 2.4
0.9
Dielectric Strength (Breakdown Potential), kV/mm 13
21 to 22
Elastic (Young's, Tensile) Modulus, GPa 70 to 71
0.9 to 1.1
Maximum Temperature: Mechanical, °C 300
80
Stiffness to Weight: Axial, points 16
0.56 to 0.68
Stiffness to Weight: Bending, points 56
36 to 38
Strength to Weight: Axial, points 4.6 to 20
7.1 to 10
Strength to Weight: Bending, points 11 to 28
20 to 25
Tensile Strength: Ultimate (UTS), MPa 41 to 180
23 to 33