MakeItFrom.com
Menu (ESC)

ZA-12 vs. PCL

ZA-12 and PCL belong to fundamentally different material chemistries. ZA-12 is a metal, while PCL is a polymeric material. Therefore, their performance will be even more dissimilar than would be suggested by the difference in properties. There are 10 material properties with values for both materials. Properties with values for just one material (28, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ZA-12 and the bottom bar is PCL.

Metric UnitsUS Customary Units

Material Properties

Density, g/cm3 6.0
1.1
Elastic (Young's, Tensile) Modulus, GPa 83
1.2
Elongation at Break, % 1.6 to 5.3
300
Maximum Temperature: Mechanical, °C 100
40
Melting Onset (Solidus), °C 380
60
Stiffness to Weight: Axial, points 7.6
0.61
Stiffness to Weight: Bending, points 24
32
Strength to Weight: Axial, points 12 to 19
2.5
Strength to Weight: Bending, points 15 to 20
9.4
Tensile Strength: Ultimate (UTS), MPa 260 to 400
10