Annealed (A or TB00) C17510 Copper
TB00 C17510 copper is C17510 copper in the TB00 (solution heat treated) temper. It has the lowest strength and highest ductility compared to the other variants of C17510 copper. The graph bars on the material properties cards below compare TB00 C17510 copper to: wrought coppers (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
120 GPa 17 x 106 psi
Elongation at Break
37 %
Poisson's Ratio
0.34
Rockwell B Hardness
44
Shear Modulus
44 GPa 6.4 x 106 psi
Shear Strength
210 MPa 30 x 103 psi
Tensile Strength: Ultimate (UTS)
310 MPa 45 x 103 psi
Tensile Strength: Yield (Proof)
120 MPa 18 x 103 psi
Thermal Properties
Latent Heat of Fusion
220 J/g
Maximum Temperature: Mechanical
220 °C 430 °F
Melting Completion (Liquidus)
1070 °C 1950 °F
Melting Onset (Solidus)
1030 °C 1880 °F
Specific Heat Capacity
390 J/kg-K 0.092 BTU/lb-°F
Thermal Conductivity
210 W/m-K 120 BTU/h-ft-°F
Thermal Expansion
17 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
23 % IACS
Electrical Conductivity: Equal Weight (Specific)
23 % IACS
Otherwise Unclassified Properties
Base Metal Price
49 % relative
Density
8.9 g/cm3 560 lb/ft3
Embodied Carbon
4.2 kg CO2/kg material
Embodied Energy
65 MJ/kg 28 x 103 BTU/lb
Embodied Water
310 L/kg 37 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
92 MJ/m3
Resilience: Unit (Modulus of Resilience)
64 kJ/m3
Stiffness to Weight: Axial
7.4 points
Stiffness to Weight: Bending
18 points
Strength to Weight: Axial
9.7 points
Strength to Weight: Bending
11 points
Thermal Diffusivity
60 mm2/s
Thermal Shock Resistance
11 points
Alloy Composition
| Cu | 95.9 to 98.4 | |
| Ni | 1.4 to 2.2 | |
| Be | 0.2 to 0.6 | |
| Co | 0 to 0.3 | |
| Si | 0 to 0.2 | |
| Al | 0 to 0.2 | |
| Fe | 0 to 0.1 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B441: Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
Copper Alloys: Preparation, Properties and Applications, Michael Naboka and Jennifer Giordano (editors), 2013
ASM Specialty Handbook: Copper and Copper Alloys, J. R. Davis (editor), 2001