MakeItFrom.com
Menu (ESC)

1060 Aluminum vs. EN 1.4749 Stainless Steel

1060 aluminum belongs to the aluminum alloys classification, while EN 1.4749 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1060 aluminum and the bottom bar is EN 1.4749 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 1.1 to 30
16
Fatigue Strength, MPa 15 to 50
190
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
80
Shear Strength, MPa 42 to 75
370
Tensile Strength: Ultimate (UTS), MPa 67 to 130
600
Tensile Strength: Yield (Proof), MPa 17 to 110
320

Thermal Properties

Latent Heat of Fusion, J/g 400
300
Maximum Temperature: Mechanical, °C 170
1100
Melting Completion (Liquidus), °C 660
1420
Melting Onset (Solidus), °C 650
1380
Specific Heat Capacity, J/kg-K 900
490
Thermal Conductivity, W/m-K 230
17
Thermal Expansion, µm/m-K 24
9.6

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 62
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 210
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
13
Density, g/cm3 2.7
7.6
Embodied Carbon, kg CO2/kg material 8.3
2.5
Embodied Energy, MJ/kg 160
36
Embodied Water, L/kg 1200
160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 0.57 to 37
80
Resilience: Unit (Modulus of Resilience), kJ/m3 2.1 to 89
250
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 50
26
Strength to Weight: Axial, points 6.9 to 13
22
Strength to Weight: Bending, points 14 to 21
21
Thermal Diffusivity, mm2/s 96
4.6
Thermal Shock Resistance, points 3.0 to 5.6
22

Alloy Composition

Aluminum (Al), % 99.6 to 100
0
Carbon (C), % 0
0.15 to 0.2
Chromium (Cr), % 0
26 to 29
Copper (Cu), % 0 to 0.050
0
Iron (Fe), % 0 to 0.35
68.5 to 73.7
Magnesium (Mg), % 0 to 0.030
0
Manganese (Mn), % 0 to 0.030
0 to 1.0
Nitrogen (N), % 0
0.15 to 0.25
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.25
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.030
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.050
0