MakeItFrom.com
Menu (ESC)

1060 Aluminum vs. Grade FDSiCr Steel

1060 aluminum belongs to the aluminum alloys classification, while grade FDSiCr steel belongs to the iron alloys. There are 24 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1060 aluminum and the bottom bar is grade FDSiCr steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
80
Tensile Strength: Ultimate (UTS), MPa 67 to 130
1930

Thermal Properties

Latent Heat of Fusion, J/g 400
270
Maximum Temperature: Mechanical, °C 170
410
Melting Completion (Liquidus), °C 660
1440
Melting Onset (Solidus), °C 650
1400
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 230
48
Thermal Expansion, µm/m-K 24
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 62
7.3
Electrical Conductivity: Equal Weight (Specific), % IACS 210
8.5

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
2.2
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.3
1.5
Embodied Energy, MJ/kg 160
20
Embodied Water, L/kg 1200
48

Common Calculations

Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 6.9 to 13
69
Strength to Weight: Bending, points 14 to 21
44
Thermal Diffusivity, mm2/s 96
13
Thermal Shock Resistance, points 3.0 to 5.6
58

Alloy Composition

Aluminum (Al), % 99.6 to 100
0
Carbon (C), % 0
0.5 to 0.6
Chromium (Cr), % 0
0.5 to 0.8
Copper (Cu), % 0 to 0.050
0 to 0.12
Iron (Fe), % 0 to 0.35
96.5 to 97.8
Magnesium (Mg), % 0 to 0.030
0
Manganese (Mn), % 0 to 0.030
0.5 to 0.9
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.25
1.2 to 1.6
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.030
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.050
0