MakeItFrom.com
Menu (ESC)

1060 Aluminum vs. R31537 Cobalt

1060 aluminum belongs to the aluminum alloys classification, while R31537 cobalt belongs to the cobalt alloys. There are 27 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1060 aluminum and the bottom bar is R31537 cobalt.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
220
Elongation at Break, % 1.1 to 30
14 to 23
Fatigue Strength, MPa 15 to 50
310 to 480
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
87
Tensile Strength: Ultimate (UTS), MPa 67 to 130
1000 to 1340
Tensile Strength: Yield (Proof), MPa 17 to 110
590 to 940

Thermal Properties

Latent Heat of Fusion, J/g 400
320
Melting Completion (Liquidus), °C 660
1360
Melting Onset (Solidus), °C 650
1290
Specific Heat Capacity, J/kg-K 900
450
Thermal Conductivity, W/m-K 230
13
Thermal Expansion, µm/m-K 24
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 62
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 210
2.1

Otherwise Unclassified Properties

Density, g/cm3 2.7
8.4
Embodied Carbon, kg CO2/kg material 8.3
8.1
Embodied Energy, MJ/kg 160
110
Embodied Water, L/kg 1200
530

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 0.57 to 37
140 to 200
Resilience: Unit (Modulus of Resilience), kJ/m3 2.1 to 89
780 to 1990
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 6.9 to 13
33 to 44
Strength to Weight: Bending, points 14 to 21
26 to 32
Thermal Diffusivity, mm2/s 96
3.4
Thermal Shock Resistance, points 3.0 to 5.6
24 to 32

Alloy Composition

Aluminum (Al), % 99.6 to 100
0
Carbon (C), % 0
0 to 0.14
Chromium (Cr), % 0
26 to 30
Cobalt (Co), % 0
58.9 to 69
Copper (Cu), % 0 to 0.050
0
Iron (Fe), % 0 to 0.35
0 to 0.75
Magnesium (Mg), % 0 to 0.030
0
Manganese (Mn), % 0 to 0.030
0 to 1.0
Molybdenum (Mo), % 0
5.0 to 7.0
Nickel (Ni), % 0
0 to 1.0
Nitrogen (N), % 0
0 to 0.25
Silicon (Si), % 0 to 0.25
0 to 1.0
Titanium (Ti), % 0 to 0.030
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.050
0

Comparable Variants