MakeItFrom.com
Menu (ESC)

1080A Aluminum vs. EN 1.3963 Alloy

1080A aluminum belongs to the aluminum alloys classification, while EN 1.3963 alloy belongs to the iron alloys. There are 24 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1080A aluminum and the bottom bar is EN 1.3963 alloy.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 2.3 to 34
29
Poisson's Ratio 0.33
0.3
Shear Modulus, GPa 26
72
Shear Strength, MPa 49 to 81
290
Tensile Strength: Ultimate (UTS), MPa 74 to 140
440
Tensile Strength: Yield (Proof), MPa 17 to 120
310

Thermal Properties

Latent Heat of Fusion, J/g 400
270
Melting Completion (Liquidus), °C 640
1430
Melting Onset (Solidus), °C 640
1390
Specific Heat Capacity, J/kg-K 900
460
Thermal Expansion, µm/m-K 23
1.6

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
25
Density, g/cm3 2.7
8.2
Embodied Carbon, kg CO2/kg material 8.3
4.8
Embodied Energy, MJ/kg 160
66
Embodied Water, L/kg 1200
110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 3.1 to 19
110
Resilience: Unit (Modulus of Resilience), kJ/m3 2.1 to 100
260
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
23
Strength to Weight: Axial, points 7.6 to 15
15
Strength to Weight: Bending, points 14 to 22
16
Thermal Shock Resistance, points 3.3 to 6.4
110

Alloy Composition

Aluminum (Al), % 99.8 to 100
0
Carbon (C), % 0
0 to 0.050
Chromium (Cr), % 0
0 to 0.25
Copper (Cu), % 0 to 0.030
0
Gallium (Ga), % 0 to 0.030
0
Iron (Fe), % 0 to 0.15
60.5 to 64.9
Magnesium (Mg), % 0 to 0.020
0
Manganese (Mn), % 0 to 0.020
0 to 0.5
Molybdenum (Mo), % 0
0 to 1.0
Nickel (Ni), % 0
35 to 37
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.15
0 to 0.5
Sulfur (S), % 0
0.1 to 0.2
Titanium (Ti), % 0 to 0.020
0
Zinc (Zn), % 0 to 0.060
0