201.0 Aluminum vs. EN 1.7014 Steel
201.0 aluminum belongs to the aluminum alloys classification, while EN 1.7014 steel belongs to the iron alloys. There are 24 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 201.0 aluminum and the bottom bar is EN 1.7014 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 95 to 140 | |
140 to 160 |
Elastic (Young's, Tensile) Modulus, GPa | 71 | |
190 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 27 | |
73 |
Tensile Strength: Ultimate (UTS), MPa | 370 to 470 | |
460 to 1390 |
Thermal Properties
Latent Heat of Fusion, J/g | 390 | |
250 |
Maximum Temperature: Mechanical, °C | 170 | |
420 |
Melting Completion (Liquidus), °C | 650 | |
1460 |
Melting Onset (Solidus), °C | 570 | |
1420 |
Specific Heat Capacity, J/kg-K | 870 | |
470 |
Thermal Conductivity, W/m-K | 120 | |
45 |
Thermal Expansion, µm/m-K | 19 | |
13 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 30 to 33 | |
7.2 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 87 to 97 | |
8.3 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 38 | |
2.2 |
Density, g/cm3 | 3.1 | |
7.8 |
Embodied Carbon, kg CO2/kg material | 8.7 | |
1.4 |
Embodied Energy, MJ/kg | 160 | |
19 |
Common Calculations
Stiffness to Weight: Axial, points | 13 | |
13 |
Stiffness to Weight: Bending, points | 45 | |
24 |
Strength to Weight: Axial, points | 33 to 42 | |
16 to 49 |
Strength to Weight: Bending, points | 37 to 44 | |
17 to 35 |
Thermal Diffusivity, mm2/s | 45 | |
12 |
Thermal Shock Resistance, points | 19 to 25 | |
13 to 41 |
Alloy Composition
Deprecated: Automatic conversion of false to array is deprecated in /home/public/compare.php on line 452
Aluminum (Al), % | 92.1 to 95.1 | |
0 |
Carbon (C), % | 0 | |
0.14 to 0.2 |
Chromium (Cr), % | 0 | |
0.7 to 1.0 |
Copper (Cu), % | 4.0 to 5.2 | |
0 to 0.25 |
Iron (Fe), % | 0 to 0.15 | |
97.3 to 98.5 |
Magnesium (Mg), % | 0.15 to 0.55 | |
0 |
Manganese (Mn), % | 0.2 to 0.5 | |
0.6 to 0.9 |
Phosphorus (P), % | 0 | |
0 to 0.025 |
Silicon (Si), % | 0 to 0.1 | |
0 to 0.3 |
Silver (Ag), % | 0.4 to 1.0 | |
0 |
Sulfur (S), % | 0 | |
0.020 to 0.040 |
Titanium (Ti), % | 0.15 to 0.35 | |
0 |
Residuals, % | 0 to 0.1 | |
0 |