MakeItFrom.com
Menu (ESC)

2011 Aluminum vs. EN 1.4740 Stainless Steel

2011 aluminum belongs to the aluminum alloys classification, while EN 1.4740 stainless steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2011 aluminum and the bottom bar is EN 1.4740 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 8.5 to 18
22
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77

Thermal Properties

Latent Heat of Fusion, J/g 390
300
Maximum Temperature: Mechanical, °C 190
900
Melting Completion (Liquidus), °C 640
1420
Melting Onset (Solidus), °C 540
1370
Specific Heat Capacity, J/kg-K 870
490
Thermal Conductivity, W/m-K 140 to 170
18
Thermal Expansion, µm/m-K 23
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35 to 45
2.2
Electrical Conductivity: Equal Weight (Specific), % IACS 100 to 130
2.6

Otherwise Unclassified Properties

Base Metal Price, % relative 11
9.5
Density, g/cm3 3.1
7.6
Embodied Carbon, kg CO2/kg material 7.9
2.3
Embodied Energy, MJ/kg 150
32
Embodied Water, L/kg 1150
120

Common Calculations

Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 44
25
Thermal Diffusivity, mm2/s 51 to 64
4.8

Alloy Composition

Aluminum (Al), % 91.3 to 94.6
0
Bismuth (Bi), % 0.2 to 0.6
0
Carbon (C), % 0
0.3 to 0.5
Chromium (Cr), % 0
16 to 19
Copper (Cu), % 5.0 to 6.0
0
Iron (Fe), % 0 to 0.7
75.4 to 82.7
Lead (Pb), % 0.2 to 0.6
0
Manganese (Mn), % 0
0 to 1.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
0 to 1.0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.4
1.0 to 2.5
Sulfur (S), % 0
0 to 0.030
Zinc (Zn), % 0 to 0.3
0
Residuals, % 0 to 0.15
0