MakeItFrom.com
Menu (ESC)

2030 Aluminum vs. ASTM A732 Cast Steel

2030 aluminum belongs to the aluminum alloys classification, while ASTM A732 cast steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2030 aluminum and the bottom bar is ASTM A732 cast steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 5.6 to 8.0
4.0 to 25
Fatigue Strength, MPa 91 to 110
230 to 750
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
72 to 73
Tensile Strength: Ultimate (UTS), MPa 370 to 420
460 to 1470
Tensile Strength: Yield (Proof), MPa 240 to 270
310 to 1340

Thermal Properties

Latent Heat of Fusion, J/g 390
250 to 260
Maximum Temperature: Mechanical, °C 190
400 to 430
Melting Completion (Liquidus), °C 640
1440 to 1460
Melting Onset (Solidus), °C 510
1400 to 1420
Specific Heat Capacity, J/kg-K 870
470 to 480
Thermal Conductivity, W/m-K 130
39 to 50
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
7.1 to 7.7
Electrical Conductivity: Equal Weight (Specific), % IACS 99
8.2 to 8.9

Otherwise Unclassified Properties

Base Metal Price, % relative 10
2.0 to 3.8
Density, g/cm3 3.1
7.8 to 7.9
Embodied Carbon, kg CO2/kg material 8.0
1.4 to 1.7
Embodied Energy, MJ/kg 150
19 to 24
Embodied Water, L/kg 1140
47 to 54

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 26
45 to 130
Resilience: Unit (Modulus of Resilience), kJ/m3 390 to 530
260 to 4770
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 45
24
Strength to Weight: Axial, points 33 to 38
16 to 52
Strength to Weight: Bending, points 37 to 40
17 to 37
Thermal Diffusivity, mm2/s 50
10 to 14
Thermal Shock Resistance, points 16 to 19
14 to 43