MakeItFrom.com
Menu (ESC)

224.0 Aluminum vs. SAE-AISI H26 Steel

224.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI H26 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 224.0 aluminum and the bottom bar is SAE-AISI H26 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
210
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
80
Tensile Strength: Ultimate (UTS), MPa 380 to 420
720 to 2100

Thermal Properties

Latent Heat of Fusion, J/g 390
240
Melting Completion (Liquidus), °C 650
1810
Melting Onset (Solidus), °C 550
1760
Specific Heat Capacity, J/kg-K 870
410
Thermal Conductivity, W/m-K 120
22
Thermal Expansion, µm/m-K 23
12

Otherwise Unclassified Properties

Base Metal Price, % relative 11
45
Density, g/cm3 3.0
9.3
Embodied Carbon, kg CO2/kg material 8.3
8.1
Embodied Energy, MJ/kg 160
120
Embodied Water, L/kg 1150
90

Common Calculations

Stiffness to Weight: Axial, points 13
12
Stiffness to Weight: Bending, points 45
21
Strength to Weight: Axial, points 35 to 38
22 to 63
Strength to Weight: Bending, points 38 to 41
19 to 39
Thermal Diffusivity, mm2/s 47
5.6
Thermal Shock Resistance, points 17 to 18
22 to 63

Alloy Composition

Aluminum (Al), % 93 to 95.2
0
Carbon (C), % 0
0.45 to 0.55
Chromium (Cr), % 0
3.8 to 4.5
Copper (Cu), % 4.5 to 5.5
0 to 0.25
Iron (Fe), % 0 to 0.1
73.3 to 77.5
Manganese (Mn), % 0.2 to 0.5
0.15 to 0.4
Nickel (Ni), % 0
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.060
0.15 to 0.4
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.35
0
Tungsten (W), % 0
17.3 to 19
Vanadium (V), % 0.050 to 0.15
0.75 to 1.3
Zirconium (Zr), % 0.1 to 0.25
0
Residuals, % 0 to 0.1
0