MakeItFrom.com
Menu (ESC)

224.0 Aluminum vs. SAE-AISI S7 Steel

224.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI S7 steel belongs to the iron alloys. There are 23 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 224.0 aluminum and the bottom bar is SAE-AISI S7 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
74
Tensile Strength: Ultimate (UTS), MPa 380 to 420
670 to 2030

Thermal Properties

Latent Heat of Fusion, J/g 390
260
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 550
1420
Specific Heat Capacity, J/kg-K 870
470
Thermal Conductivity, W/m-K 120
40
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 32
7.8
Electrical Conductivity: Equal Weight (Specific), % IACS 95
9.0

Otherwise Unclassified Properties

Base Metal Price, % relative 11
5.0
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.3
2.3
Embodied Energy, MJ/kg 160
31
Embodied Water, L/kg 1150
65

Common Calculations

Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 45
25
Strength to Weight: Axial, points 35 to 38
24 to 72
Strength to Weight: Bending, points 38 to 41
22 to 46
Thermal Diffusivity, mm2/s 47
11
Thermal Shock Resistance, points 17 to 18
22 to 66

Alloy Composition

Aluminum (Al), % 93 to 95.2
0
Carbon (C), % 0
0.45 to 0.55
Chromium (Cr), % 0
3.0 to 3.5
Copper (Cu), % 4.5 to 5.5
0 to 0.25
Iron (Fe), % 0 to 0.1
91.6 to 94.9
Manganese (Mn), % 0.2 to 0.5
0.2 to 0.9
Molybdenum (Mo), % 0
1.3 to 1.8
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.060
0.2 to 1.0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.35
0
Vanadium (V), % 0.050 to 0.15
0 to 0.3
Zirconium (Zr), % 0.1 to 0.25
0
Residuals, % 0 to 0.1
0