MakeItFrom.com
Menu (ESC)

238.0 Aluminum vs. EN 1.5026 Steel

238.0 aluminum belongs to the aluminum alloys classification, while EN 1.5026 steel belongs to the iron alloys. There are 24 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 238.0 aluminum and the bottom bar is EN 1.5026 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 76
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
72
Tensile Strength: Ultimate (UTS), MPa 210
660 to 1980

Thermal Properties

Latent Heat of Fusion, J/g 430
280
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 600
1440
Melting Onset (Solidus), °C 510
1390
Specific Heat Capacity, J/kg-K 840
480
Thermal Conductivity, W/m-K 100
47
Thermal Expansion, µm/m-K 21
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
7.3
Electrical Conductivity: Equal Weight (Specific), % IACS 67
8.5

Otherwise Unclassified Properties

Base Metal Price, % relative 12
1.9
Density, g/cm3 3.4
7.7
Embodied Carbon, kg CO2/kg material 7.4
1.5
Embodied Energy, MJ/kg 140
19
Embodied Water, L/kg 1040
46

Common Calculations

Stiffness to Weight: Axial, points 12
13
Stiffness to Weight: Bending, points 42
25
Strength to Weight: Axial, points 17
24 to 71
Strength to Weight: Bending, points 23
22 to 45
Thermal Diffusivity, mm2/s 37
13
Thermal Shock Resistance, points 9.1
20 to 60

Alloy Composition

Aluminum (Al), % 81.9 to 84.9
0
Carbon (C), % 0
0.52 to 0.6
Copper (Cu), % 9.5 to 10.5
0
Iron (Fe), % 1.0 to 1.5
96.5 to 97.3
Magnesium (Mg), % 0 to 0.25
0
Manganese (Mn), % 0
0.6 to 0.9
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 3.6 to 4.4
1.6 to 2.0
Sulfur (S), % 0
0 to 0.025
Zinc (Zn), % 1.0 to 1.5
0