MakeItFrom.com
Menu (ESC)

238.0 Aluminum vs. Grade FDC Steel

238.0 aluminum belongs to the aluminum alloys classification, while grade FDC steel belongs to the iron alloys. There are 24 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 238.0 aluminum and the bottom bar is grade FDC steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 76
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
80
Tensile Strength: Ultimate (UTS), MPa 210
1680

Thermal Properties

Latent Heat of Fusion, J/g 430
250
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 600
1450
Melting Onset (Solidus), °C 510
1410
Specific Heat Capacity, J/kg-K 840
470
Thermal Conductivity, W/m-K 100
51
Thermal Expansion, µm/m-K 21
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 67
8.2

Otherwise Unclassified Properties

Base Metal Price, % relative 12
1.9
Density, g/cm3 3.4
7.8
Embodied Carbon, kg CO2/kg material 7.4
1.4
Embodied Energy, MJ/kg 140
19
Embodied Water, L/kg 1040
47

Common Calculations

Stiffness to Weight: Axial, points 12
13
Stiffness to Weight: Bending, points 42
24
Strength to Weight: Axial, points 17
60
Strength to Weight: Bending, points 23
40
Thermal Diffusivity, mm2/s 37
14
Thermal Shock Resistance, points 9.1
50

Alloy Composition

Aluminum (Al), % 81.9 to 84.9
0
Carbon (C), % 0
0.6 to 0.75
Chromium (Cr), % 0
0 to 0.3
Copper (Cu), % 9.5 to 10.5
0 to 0.12
Iron (Fe), % 1.0 to 1.5
98 to 99.4
Magnesium (Mg), % 0 to 0.25
0
Manganese (Mn), % 0
0.5 to 1.2
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 3.6 to 4.4
0.1 to 0.35
Sulfur (S), % 0
0 to 0.025
Zinc (Zn), % 1.0 to 1.5
0