MakeItFrom.com
Menu (ESC)

2618 Aluminum vs. EN 1.4607 Stainless Steel

2618 aluminum belongs to the aluminum alloys classification, while EN 1.4607 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2618 aluminum and the bottom bar is EN 1.4607 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 5.8
21
Fatigue Strength, MPa 110
180
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77
Shear Strength, MPa 260
330
Tensile Strength: Ultimate (UTS), MPa 420
530
Tensile Strength: Yield (Proof), MPa 350
270

Thermal Properties

Latent Heat of Fusion, J/g 390
290
Maximum Temperature: Mechanical, °C 210
930
Melting Completion (Liquidus), °C 640
1440
Melting Onset (Solidus), °C 550
1400
Specific Heat Capacity, J/kg-K 880
480
Thermal Conductivity, W/m-K 160
18
Thermal Expansion, µm/m-K 22
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 37
2.7
Electrical Conductivity: Equal Weight (Specific), % IACS 110
3.1

Otherwise Unclassified Properties

Base Metal Price, % relative 11
13
Density, g/cm3 2.9
7.7
Embodied Carbon, kg CO2/kg material 8.3
2.8
Embodied Energy, MJ/kg 150
40
Embodied Water, L/kg 1150
130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 23
91
Resilience: Unit (Modulus of Resilience), kJ/m3 850
190
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 47
25
Strength to Weight: Axial, points 40
19
Strength to Weight: Bending, points 42
19
Thermal Diffusivity, mm2/s 62
4.9
Thermal Shock Resistance, points 19
19

Alloy Composition

Aluminum (Al), % 92.4 to 94.9
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0
18.5 to 20.5
Copper (Cu), % 1.9 to 2.7
0
Iron (Fe), % 0.9 to 1.3
75.6 to 81.4
Magnesium (Mg), % 1.3 to 1.8
0
Manganese (Mn), % 0
0 to 1.0
Nickel (Ni), % 0.9 to 1.2
0
Niobium (Nb), % 0
0 to 1.0
Nitrogen (N), % 0
0 to 0.030
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0.1 to 0.25
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0.040 to 0.1
0.15 to 0.8
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0