MakeItFrom.com
Menu (ESC)

295.0 Aluminum vs. EN 1.6553 Steel

295.0 aluminum belongs to the aluminum alloys classification, while EN 1.6553 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 295.0 aluminum and the bottom bar is EN 1.6553 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 60 to 93
210 to 240
Elastic (Young's, Tensile) Modulus, GPa 71
190
Elongation at Break, % 2.0 to 7.2
19 to 21
Fatigue Strength, MPa 44 to 55
330 to 460
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
73
Tensile Strength: Ultimate (UTS), MPa 230 to 280
710 to 800
Tensile Strength: Yield (Proof), MPa 100 to 220
470 to 670

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 170
420
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 530
1420
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 140
39
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
7.5
Electrical Conductivity: Equal Weight (Specific), % IACS 100
8.6

Otherwise Unclassified Properties

Base Metal Price, % relative 10
2.7
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 7.9
1.6
Embodied Energy, MJ/kg 150
21
Embodied Water, L/kg 1140
51

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 5.2 to 13
130 to 150
Resilience: Unit (Modulus of Resilience), kJ/m3 77 to 340
600 to 1190
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 21 to 26
25 to 28
Strength to Weight: Bending, points 27 to 32
23 to 24
Thermal Diffusivity, mm2/s 54
10
Thermal Shock Resistance, points 9.8 to 12
21 to 23

Alloy Composition

Aluminum (Al), % 91.4 to 95.3
0
Carbon (C), % 0
0.23 to 0.28
Chromium (Cr), % 0
0.4 to 0.8
Copper (Cu), % 4.0 to 5.0
0 to 0.3
Iron (Fe), % 0 to 1.0
95.6 to 98.2
Magnesium (Mg), % 0 to 0.030
0
Manganese (Mn), % 0 to 0.35
0.6 to 1.0
Molybdenum (Mo), % 0
0.15 to 0.3
Nickel (Ni), % 0
0.4 to 0.8
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.7 to 1.5
0 to 0.8
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.25
0
Vanadium (V), % 0
0 to 0.030
Zinc (Zn), % 0 to 0.35
0
Residuals, % 0 to 0.15
0

Comparable Variants