MakeItFrom.com
Menu (ESC)

296.0 Aluminum vs. CC494K Bronze

296.0 aluminum belongs to the aluminum alloys classification, while CC494K bronze belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 296.0 aluminum and the bottom bar is CC494K bronze.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 75 to 90
67
Elastic (Young's, Tensile) Modulus, GPa 72
100
Elongation at Break, % 3.2 to 7.1
7.6
Poisson's Ratio 0.33
0.35
Shear Modulus, GPa 27
39
Tensile Strength: Ultimate (UTS), MPa 260 to 270
210
Tensile Strength: Yield (Proof), MPa 120 to 180
94

Thermal Properties

Latent Heat of Fusion, J/g 420
180
Maximum Temperature: Mechanical, °C 170
160
Melting Completion (Liquidus), °C 630
970
Melting Onset (Solidus), °C 540
890
Specific Heat Capacity, J/kg-K 870
360
Thermal Conductivity, W/m-K 130 to 150
63
Thermal Expansion, µm/m-K 22
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 33 to 37
16
Electrical Conductivity: Equal Weight (Specific), % IACS 99 to 110
16

Otherwise Unclassified Properties

Base Metal Price, % relative 11
31
Density, g/cm3 3.0
9.1
Embodied Carbon, kg CO2/kg material 7.8
3.1
Embodied Energy, MJ/kg 150
50
Embodied Water, L/kg 1110
360

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 7.6 to 15
13
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 220
43
Stiffness to Weight: Axial, points 13
6.4
Stiffness to Weight: Bending, points 46
17
Strength to Weight: Axial, points 24 to 25
6.5
Strength to Weight: Bending, points 30 to 31
8.8
Thermal Diffusivity, mm2/s 51 to 56
19
Thermal Shock Resistance, points 12
7.8

Alloy Composition

Aluminum (Al), % 89 to 94
0 to 0.010
Antimony (Sb), % 0
0 to 0.5
Copper (Cu), % 4.0 to 5.0
78 to 87
Iron (Fe), % 0 to 1.2
0 to 0.25
Lead (Pb), % 0
8.0 to 10
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.35
0 to 0.2
Nickel (Ni), % 0 to 0.35
0 to 2.0
Phosphorus (P), % 0
0 to 0.1
Silicon (Si), % 2.0 to 3.0
0 to 0.010
Sulfur (S), % 0
0 to 0.1
Tin (Sn), % 0
4.0 to 6.0
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.5
0 to 2.0
Residuals, % 0 to 0.35
0