MakeItFrom.com
Menu (ESC)

3003 Aluminum vs. C66200 Brass

3003 aluminum belongs to the aluminum alloys classification, while C66200 brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3003 aluminum and the bottom bar is C66200 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
110
Elongation at Break, % 1.1 to 28
8.0 to 15
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 26
42
Shear Strength, MPa 68 to 130
270 to 300
Tensile Strength: Ultimate (UTS), MPa 110 to 240
450 to 520
Tensile Strength: Yield (Proof), MPa 40 to 210
410 to 480

Thermal Properties

Latent Heat of Fusion, J/g 400
200
Maximum Temperature: Mechanical, °C 180
180
Melting Completion (Liquidus), °C 650
1070
Melting Onset (Solidus), °C 640
1030
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 180
150
Thermal Expansion, µm/m-K 23
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 44
35
Electrical Conductivity: Equal Weight (Specific), % IACS 140
36

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
29
Density, g/cm3 2.8
8.7
Embodied Carbon, kg CO2/kg material 8.1
2.7
Embodied Energy, MJ/kg 150
43
Embodied Water, L/kg 1180
320

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 0.95 to 63
40 to 66
Resilience: Unit (Modulus of Resilience), kJ/m3 11 to 300
760 to 1030
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 11 to 24
14 to 17
Strength to Weight: Bending, points 18 to 30
15 to 16
Thermal Diffusivity, mm2/s 71
45
Thermal Shock Resistance, points 4.7 to 10
16 to 18

Alloy Composition

Aluminum (Al), % 96.8 to 99
0
Copper (Cu), % 0.050 to 0.2
86.6 to 91
Iron (Fe), % 0 to 0.7
0 to 0.050
Lead (Pb), % 0
0 to 0.050
Manganese (Mn), % 1.0 to 1.5
0
Nickel (Ni), % 0
0.3 to 1.0
Phosphorus (P), % 0
0.050 to 0.2
Silicon (Si), % 0 to 0.6
0
Tin (Sn), % 0
0.2 to 0.7
Zinc (Zn), % 0 to 0.1
6.5 to 12.9
Residuals, % 0
0 to 0.5