MakeItFrom.com
Menu (ESC)

3005 Aluminum vs. AWS BAg-3

3005 aluminum belongs to the aluminum alloys classification, while AWS BAg-3 belongs to the otherwise unclassified metals. There are 17 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3005 aluminum and the bottom bar is AWS BAg-3.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
80
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 26
30
Tensile Strength: Ultimate (UTS), MPa 140 to 270
170

Thermal Properties

Latent Heat of Fusion, J/g 400
120
Melting Completion (Liquidus), °C 660
690
Melting Onset (Solidus), °C 640
630
Specific Heat Capacity, J/kg-K 900
290
Thermal Expansion, µm/m-K 23
22

Otherwise Unclassified Properties

Density, g/cm3 2.8
9.3
Embodied Carbon, kg CO2/kg material 8.2
49
Embodied Energy, MJ/kg 150
770

Common Calculations

Stiffness to Weight: Axial, points 14
4.8
Stiffness to Weight: Bending, points 49
15
Strength to Weight: Axial, points 14 to 27
5.1
Strength to Weight: Bending, points 21 to 33
7.3
Thermal Shock Resistance, points 6.0 to 12
6.9

Alloy Composition

Aluminum (Al), % 95.7 to 98.8
0
Cadmium (Cd), % 0
15 to 17
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.3
14.5 to 16.5
Iron (Fe), % 0 to 0.7
0
Magnesium (Mg), % 0.2 to 0.6
0
Manganese (Mn), % 1.0 to 1.5
0
Nickel (Ni), % 0
2.5 to 3.5
Silicon (Si), % 0 to 0.6
0
Silver (Ag), % 0
49 to 51
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
13.5 to 17.5
Residuals, % 0
0 to 0.15