MakeItFrom.com
Menu (ESC)

3005 Aluminum vs. CC760S Brass

3005 aluminum belongs to the aluminum alloys classification, while CC760S brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3005 aluminum and the bottom bar is CC760S brass.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 33 to 73
51
Elastic (Young's, Tensile) Modulus, GPa 70
110
Elongation at Break, % 1.1 to 16
22
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 26
42
Tensile Strength: Ultimate (UTS), MPa 140 to 270
180
Tensile Strength: Yield (Proof), MPa 51 to 240
80

Thermal Properties

Latent Heat of Fusion, J/g 400
190
Maximum Temperature: Mechanical, °C 180
170
Melting Completion (Liquidus), °C 660
1000
Melting Onset (Solidus), °C 640
940
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 160
150
Thermal Expansion, µm/m-K 23
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
38
Electrical Conductivity: Equal Weight (Specific), % IACS 140
40

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
28
Density, g/cm3 2.8
8.6
Embodied Carbon, kg CO2/kg material 8.2
2.6
Embodied Energy, MJ/kg 150
43
Embodied Water, L/kg 1180
320

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.2 to 18
33
Resilience: Unit (Modulus of Resilience), kJ/m3 18 to 390
29
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 49
19
Strength to Weight: Axial, points 14 to 27
5.8
Strength to Weight: Bending, points 21 to 33
8.2
Thermal Diffusivity, mm2/s 64
45
Thermal Shock Resistance, points 6.0 to 12
6.2

Alloy Composition

Aluminum (Al), % 95.7 to 98.8
0 to 0.010
Arsenic (As), % 0
0.050 to 0.15
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.3
83 to 88
Iron (Fe), % 0 to 0.7
0 to 0.15
Lead (Pb), % 0
0 to 0.5
Magnesium (Mg), % 0.2 to 0.6
0
Manganese (Mn), % 1.0 to 1.5
0 to 0.1
Nickel (Ni), % 0
0 to 0.1
Silicon (Si), % 0 to 0.6
0 to 0.020
Tin (Sn), % 0
0 to 0.3
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
10.7 to 17
Residuals, % 0 to 0.15
0