MakeItFrom.com
Menu (ESC)

332.0 Aluminum vs. EN 1.4806 Stainless Steel

332.0 aluminum belongs to the aluminum alloys classification, while EN 1.4806 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 332.0 aluminum and the bottom bar is EN 1.4806 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 110
140
Elastic (Young's, Tensile) Modulus, GPa 73
190
Elongation at Break, % 1.0
6.8
Fatigue Strength, MPa 90
120
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
75
Tensile Strength: Ultimate (UTS), MPa 250
470
Tensile Strength: Yield (Proof), MPa 190
250

Thermal Properties

Latent Heat of Fusion, J/g 530
320
Maximum Temperature: Mechanical, °C 170
1000
Melting Completion (Liquidus), °C 580
1380
Melting Onset (Solidus), °C 530
1340
Specific Heat Capacity, J/kg-K 880
480
Thermal Conductivity, W/m-K 100
12
Thermal Expansion, µm/m-K 21
15

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 84
1.9

Otherwise Unclassified Properties

Base Metal Price, % relative 10
31
Density, g/cm3 2.8
8.0
Embodied Carbon, kg CO2/kg material 7.8
5.4
Embodied Energy, MJ/kg 140
76
Embodied Water, L/kg 1040
190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.3
27
Resilience: Unit (Modulus of Resilience), kJ/m3 250
160
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 24
16
Strength to Weight: Bending, points 31
17
Thermal Diffusivity, mm2/s 42
3.1
Thermal Shock Resistance, points 12
11

Alloy Composition

Aluminum (Al), % 80.1 to 89
0
Carbon (C), % 0
0.3 to 0.5
Chromium (Cr), % 0
16 to 18
Copper (Cu), % 2.0 to 4.0
0
Iron (Fe), % 0 to 1.2
40.4 to 48.7
Magnesium (Mg), % 0.5 to 1.5
0
Manganese (Mn), % 0 to 0.5
0 to 2.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0 to 0.5
34 to 36
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 8.5 to 10.5
1.0 to 2.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 1.0
0
Residuals, % 0 to 0.5
0