MakeItFrom.com
Menu (ESC)

336.0 Aluminum vs. EN 1.4521 Stainless Steel

336.0 aluminum belongs to the aluminum alloys classification, while EN 1.4521 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 336.0 aluminum and the bottom bar is EN 1.4521 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 75
200
Elongation at Break, % 0.5
23
Fatigue Strength, MPa 80 to 93
230
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 28
78
Shear Strength, MPa 190 to 250
330
Tensile Strength: Ultimate (UTS), MPa 250 to 320
520
Tensile Strength: Yield (Proof), MPa 190 to 300
340

Thermal Properties

Latent Heat of Fusion, J/g 570
290
Maximum Temperature: Mechanical, °C 210
930
Melting Completion (Liquidus), °C 570
1460
Melting Onset (Solidus), °C 540
1410
Specific Heat Capacity, J/kg-K 890
480
Thermal Conductivity, W/m-K 120
23
Thermal Expansion, µm/m-K 19
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 29
2.2
Electrical Conductivity: Equal Weight (Specific), % IACS 95
2.5

Otherwise Unclassified Properties

Base Metal Price, % relative 11
12
Density, g/cm3 2.8
7.7
Embodied Carbon, kg CO2/kg material 7.9
2.8
Embodied Energy, MJ/kg 140
39
Embodied Water, L/kg 1010
130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 1.1 to 1.6
100
Resilience: Unit (Modulus of Resilience), kJ/m3 250 to 580
280
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 51
25
Strength to Weight: Axial, points 25 to 32
19
Strength to Weight: Bending, points 32 to 38
19
Thermal Diffusivity, mm2/s 48
6.2
Thermal Shock Resistance, points 12 to 16
18

Alloy Composition

Aluminum (Al), % 79.1 to 85.8
0
Carbon (C), % 0
0 to 0.025
Chromium (Cr), % 0
17 to 20
Copper (Cu), % 0.5 to 1.5
0
Iron (Fe), % 0 to 1.2
74.6 to 81.1
Magnesium (Mg), % 0.7 to 1.3
0
Manganese (Mn), % 0 to 0.35
0 to 1.0
Molybdenum (Mo), % 0
1.8 to 2.5
Nickel (Ni), % 2.0 to 3.0
0
Nitrogen (N), % 0
0 to 0.030
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 11 to 13
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.25
0.15 to 0.8
Zinc (Zn), % 0 to 0.35
0