MakeItFrom.com
Menu (ESC)

336.0 Aluminum vs. N08926 Stainless Steel

336.0 aluminum belongs to the aluminum alloys classification, while N08926 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 336.0 aluminum and the bottom bar is N08926 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 75
200
Elongation at Break, % 0.5
40
Fatigue Strength, MPa 80 to 93
290
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 28
80
Shear Strength, MPa 190 to 250
500
Tensile Strength: Ultimate (UTS), MPa 250 to 320
740
Tensile Strength: Yield (Proof), MPa 190 to 300
330

Thermal Properties

Latent Heat of Fusion, J/g 570
300
Maximum Temperature: Mechanical, °C 210
1100
Melting Completion (Liquidus), °C 570
1460
Melting Onset (Solidus), °C 540
1410
Specific Heat Capacity, J/kg-K 890
460
Thermal Conductivity, W/m-K 120
12
Thermal Expansion, µm/m-K 19
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 29
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 95
1.9

Otherwise Unclassified Properties

Base Metal Price, % relative 11
33
Density, g/cm3 2.8
8.1
Embodied Carbon, kg CO2/kg material 7.9
6.2
Embodied Energy, MJ/kg 140
84
Embodied Water, L/kg 1010
200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 1.1 to 1.6
240
Resilience: Unit (Modulus of Resilience), kJ/m3 250 to 580
270
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 51
24
Strength to Weight: Axial, points 25 to 32
25
Strength to Weight: Bending, points 32 to 38
22
Thermal Diffusivity, mm2/s 48
3.2
Thermal Shock Resistance, points 12 to 16
16

Alloy Composition

Aluminum (Al), % 79.1 to 85.8
0
Carbon (C), % 0
0 to 0.020
Chromium (Cr), % 0
19 to 21
Copper (Cu), % 0.5 to 1.5
0.5 to 1.5
Iron (Fe), % 0 to 1.2
41.7 to 50.4
Magnesium (Mg), % 0.7 to 1.3
0
Manganese (Mn), % 0 to 0.35
0 to 2.0
Molybdenum (Mo), % 0
6.0 to 7.0
Nickel (Ni), % 2.0 to 3.0
24 to 26
Nitrogen (N), % 0
0.15 to 0.25
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 11 to 13
0 to 0.5
Sulfur (S), % 0
0 to 0.010
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.35
0