MakeItFrom.com
Menu (ESC)

354.0 Aluminum vs. C42500 Brass

354.0 aluminum belongs to the aluminum alloys classification, while C42500 brass belongs to the copper alloys. There are 28 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 354.0 aluminum and the bottom bar is C42500 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
110
Elongation at Break, % 2.4 to 3.0
2.0 to 49
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 27
42
Tensile Strength: Ultimate (UTS), MPa 360 to 380
310 to 630
Tensile Strength: Yield (Proof), MPa 280 to 310
120 to 590

Thermal Properties

Latent Heat of Fusion, J/g 530
200
Maximum Temperature: Mechanical, °C 170
180
Melting Completion (Liquidus), °C 600
1030
Melting Onset (Solidus), °C 550
1010
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 130
120
Thermal Expansion, µm/m-K 21
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 32
28
Electrical Conductivity: Equal Weight (Specific), % IACS 110
29

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
30
Density, g/cm3 2.7
8.7
Embodied Carbon, kg CO2/kg material 7.8
2.8
Embodied Energy, MJ/kg 150
46
Embodied Water, L/kg 1070
330

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 8.6 to 9.8
12 to 130
Resilience: Unit (Modulus of Resilience), kJ/m3 540 to 670
64 to 1570
Stiffness to Weight: Axial, points 15
7.1
Stiffness to Weight: Bending, points 52
18
Strength to Weight: Axial, points 37 to 39
9.9 to 20
Strength to Weight: Bending, points 42 to 44
12 to 19
Thermal Diffusivity, mm2/s 52
36
Thermal Shock Resistance, points 17 to 18
11 to 22

Alloy Composition

Aluminum (Al), % 87.3 to 89.4
0
Copper (Cu), % 1.6 to 2.0
87 to 90
Iron (Fe), % 0 to 0.2
0 to 0.050
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 0.4 to 0.6
0
Manganese (Mn), % 0 to 0.1
0
Phosphorus (P), % 0
0 to 0.35
Silicon (Si), % 8.6 to 9.4
0
Tin (Sn), % 0
1.5 to 3.0
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.1
6.1 to 11.5
Residuals, % 0 to 0.15
0 to 0.5