40 GF HDPE vs. Epoxy
40 GF HDPE belongs to the thermoplastics classification, while epoxy belongs to the thermoset plastics. There are 7 material properties with values for both materials. Properties with values for just one material (19, in this case) are not shown.
For each property being compared, the top bar is 40 GF HDPE and the bottom bar is epoxy.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.3 | |
| 1.3 |
| Elongation at Break, % | 2.5 | |
| 4.5 |
| Maximum Temperature: Mechanical, °C | 90 | |
| 130 |
| Specific Heat Capacity, J/kg-K | 1330 | |
| 1500 |
| Strength to Weight: Axial, points | 17 | |
| 14 |
| Strength to Weight: Bending, points | 32 | |
| 28 |
| Tensile Strength: Ultimate (UTS), MPa | 80 | |
| 67 |