MakeItFrom.com
Menu (ESC)

4007 Aluminum vs. EN 1.0145 Steel

4007 aluminum belongs to the aluminum alloys classification, while EN 1.0145 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 4007 aluminum and the bottom bar is EN 1.0145 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 32 to 44
140
Elastic (Young's, Tensile) Modulus, GPa 71
190
Elongation at Break, % 5.1 to 23
21
Fatigue Strength, MPa 46 to 88
180
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
73
Shear Strength, MPa 80 to 90
300
Tensile Strength: Ultimate (UTS), MPa 130 to 160
470
Tensile Strength: Yield (Proof), MPa 50 to 120
250

Thermal Properties

Latent Heat of Fusion, J/g 410
250
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 590
1420
Specific Heat Capacity, J/kg-K 890
470
Thermal Conductivity, W/m-K 170
51
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
7.2
Electrical Conductivity: Equal Weight (Specific), % IACS 140
8.2

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.9
Density, g/cm3 2.8
7.9
Embodied Carbon, kg CO2/kg material 8.1
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1160
47

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 7.4 to 23
85
Resilience: Unit (Modulus of Resilience), kJ/m3 18 to 110
170
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 49
24
Strength to Weight: Axial, points 12 to 15
17
Strength to Weight: Bending, points 20 to 23
17
Thermal Diffusivity, mm2/s 67
14
Thermal Shock Resistance, points 5.5 to 6.7
15

Alloy Composition

Aluminum (Al), % 94.1 to 97.6
0
Carbon (C), % 0
0 to 0.21
Chromium (Cr), % 0.050 to 0.25
0
Cobalt (Co), % 0 to 0.050
0
Copper (Cu), % 0 to 0.2
0 to 0.6
Iron (Fe), % 0.4 to 1.0
97.5 to 100
Magnesium (Mg), % 0 to 0.2
0
Manganese (Mn), % 0.8 to 1.5
0 to 1.6
Nickel (Ni), % 0.15 to 0.7
0
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 1.0 to 1.7
0
Sulfur (S), % 0
0 to 0.035
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0